Pirana-like belay devices

Specially shaped figure-8 for canyoning and rope rescues.
Lightweight construction. 9 different grades of friction for abseiling.

A specially formed abseil eight developed on the Petzl Pirana.
Specifically for canyoning and rescue operations.
Abseil Variants with different friction levels are possible.

A specially shaped abseiling developed further on the Pirana of Petzl. Specifically for canyoning and rescue work. Abseiling variants with different degrees of friction are possible. Available in hardcoat or polished.

Many options allow for careful adjustment of friction while rappelling. Symmetry allows flipping, which extends life. Many options have made this a popular rappel device. For persons with weight greater than (>170 lbs = 77 kg).

Asymmetric design, easy to use with different friction modes which allow adjustment of friction while on rappel. Partially reinforced areas where high abrasion occurs for extended lifetime.Integrated O-Ring, aluminium 7075-T6.

Innovative abseiling device with many options to adjust the friction during abseiling. Partially reinforced areas for longer life. The integrated O-ring holds the device on the carabiner.

Innovative abseiling device with many options to adjust the friction during abseiling. Partly reinforced areas, machined from stainless steel. The integrated O-ring holds the device on the carabiner.

The eight abseil device is specially designed for canyoning with different braking positions. Suitable for single ropes from 7.8 to 12mm. With internal rubber ring to keep carabiner in place. Made of aluminum alloy.

Ultralight descender for the use of small diameter ropes. Due to the special geometry, different levels of braking can be achieved, so that the abseiling speed can be precisely dosed.

Functioning as a variable friction apple device, plaque and releasable block, both intermediate and advanced users can use many available techniques to meet their specific canyoning needs.

The new multi-purpose descender specially designed for canyoning and rescue operations where descending and hanging still / fixation are common. Suitable for ropes from 7.8 to 12.7 mm in diameter. Aluminum alloy.

Descender specially designed for canyoning and rescue operations where descending and hanging still / fixation are common. Suitable for ropes from 7.8 to 12.7 mm in diameter. Aluminium. alloy. Colour black.

The rubber spare part is also available as a spare part.

The Pivot has all friction settings and multiple rigging options including the "Joker" or a detachable emergency block. The Pivot has multiple attachment points that allow the user to switch or "rotate" the descent modes.

Before starting the descent, there are three different braking positions to choose from, depending on the weight of the user, the diameter of the rope and the terrain. Made of aluminum and specially designed for canyoning.

Is designed for group or learning use and is an adjustable friction descender for canyoning. It has three rope installation options. Adjust the amount of friction before starting a descent.

Is designed for group or learning use and is an adjustable friction descender for canyoning. It has three rope installation options. Adjust the amount of friction before starting a descent. Black.

Suitable for a wide range of rope sizes and are super easy to bind off. The carabiner hole has a rubber seal so that it fits your carabiner perfectly and cannot move.