Pitons

Thin gap lashing hook, made of hardened CrMo steel, EN569, category F. They all have a 16mm carabiner hole. Lengths: 20, 35, 50, 85 and 80mm.

Thin gap lashing hook, made of hardened CrMo steel, EN569, category F. They all have a 16mm carabiner hole. Lengths: 20, 35, 50, 85 and 80mm.

Thin gap lashing hook, made of hardened CrMo steel, EN569, category F. They all have a 16mm carabiner hole. Lengths: 20, 35, 50, 85 and 80mm.

Thin gap lashing hook, made of hardened CrMo steel, EN569, category F. They all have a 16mm carabiner hole. Lengths: 20, 35, 50, 85 and 80mm.

Thin gap lashing hook, made of hardened CrMo steel, EN569, category F. They all have a 16mm carabiner hole. Lengths: 20, 35, 50, 85 and 80mm.

For larger cracks, pockets and holes. The design, in combination with the resilience of the steel used, gives this swatting hook (piton / percussion hook) an inherently high holding power. Available sizes: No. 1 - 6.

Its precision-placement hooks for narrow rock cracks. There are two holes in the thick part of the hook to save weight without sacrificing strength. 4 variants.

Classic hammer hooks for thin cracks/cracks. Knifeblades are precision ground hooks that can be used in shallow cracks due to their short length. The holes are for clipping in carabiner or maillon for proper load angle.

Is an angular piton (piton / striking hook) made of hardened steel. To be used on hard rock (granite, slate, etc.) in medium-sized cracks. Excellent extraction strength due to its angular shape. Weight: 75g (7.5cm) / 101g (11cm).

Is a hard steel piton with a tapered shape. Designed to fit very thin cracks of varying depths. Used on hard rock (granite, schist etc.). Two holes for the correct placement of the carbine.

Climbing Technology (CT)​ Eye Round is a sSoft steel zinc plated piton with U tip

Main characteristics:

∙ to be used on soft rock (limestone etc.) in vertical cracks;
∙ it deforms adapting itself to the cracks of the rock…

Is a mild steel galvanized whip hook (piton / percussion hook) with V-tip. Use on soft rock (limestone, etc.) in vertical cracks. it deforms to conform to the cracks of the rock where it has been inserted.

Is a universal hard steel whacking hook (piton / percussion hook) with a 45 ° curved head. Can be used on hard rock (granite, slate, etc.) in any type of crack. Eye with grooves that facilitate positioning of the carabiner.

Is a universal soft steel zinc plated piton with 45° angled head. To be used on soft rock (limestone etc.) in every kind of crack. it deforms adapting itself to the cracks of the rock where it is inserted. Eyelet is with grooves.

Is a pleated rock hook (piton / percussion hook) in chromed steel for use in thin crevices in granite or in hard rock. Available in 4, 6, 8 and 10cm. Weight: 48 grams (8cm).

Is a forged rock hook (piton / percussion hook) in semi-hard steel for fine crevices in limestone and granite. Available in 6, 8 and 10 cm. Weight: 90 grams (8cm).

Is a forged piton / rock hook in semi-hard steel for wide cracks in limestone and granite and is available in 10 and 12 cm. Weight 10cm: 125 grams.

Is a forged semi-hard steel rock hook (piton / percussion hook) available in 5, 7 and 9 cm. Punch hook for layered cracks in lime and granite. Weight: 95 grams (7 cm).

Is a pleated rock hook (piton / percussion hook) of 7 or 11 cm in chromed steel. Piton for flared, rounded-edge cracks in granite and hard rock. Weight: 80 grams (7cm) / 95 grams (11cm).