Bolts & Hangers 8 mm

This anchor is corrosion resistant, extremely strong, quick to use, offers a good combination of reliability and safety, low environmental impact; it is cheaper than the self-locking version.

TAP means self-drilling anchor. The advantage is that in this case you don't have to use the drill to make the hole, but you can do it all manually using the Raumer Stroker.

Curved lightweight potholing plate specially designed to keep the rope away from the rock. Aluminum hook with M8 threaded stainless steel. Suspended carabiner is protectively between rock and rope.

Keep the carabiner parallel to the rock: an advantage for certain placements. Lightweight: a good choice for canyoning expeditions​. To be used with: Petzl Cheville Autoforeuse

Bolt hanger is designed with two different loops to optimize the use of the Raumer Climbing System STICK-UP (complete). Is very useful to pass a knot or move between two sections of rope Ø 8mm hole.

This anchor device made up of a ring is well used in caving because it allows complex route equipment even without any carabiners. The hole of 8 mm allows the ring to be screw fixed or wall plugged by means of screw anchors M8.

Stainless steel ring with M8 stainless steel screw to avoid accidental loss. The screw also makes it suitable to be mounted on Raumer RAINOX M8 units.

Is the revolutionary new anchor designed to be used with very long bolts like our Hang Fix bolts or screws from Multi Monti.

1 hex-13mm stainless steel bolt with threaded shank. M8 x 25. Length = 16mm. Includes 1 rubber O-ring rings. Suitable for equipping a hanger with a Ø8 hole.

Stainless steel bolt with threaded shank. M8 x 25. Length = 16mm. Includes 1 rubber O-ring rings. Suitable for equipping a hanger with a Ø8 hole. Set of 10 pieces.

Suitable for use on hard compact rock (limestone, marble, dolomite). Short type (ØM8x55) with one expanding collar.

This Fix is the model SITA GBK and is ideal for caving use with the STICK-UP auxiliary system (art.144) on relatively hard rock. Suitable for use on hard compact rock (limestone, marble, dolomite).

Stainless steel AISI 316L bolt, short type. Recommended for caving and rescue anchors. Has one spreading collar and is particularly suitable for anchors in hard compact rock (limestone, marble, dolomite).

Ideal for caving or cave clearance. Features two expanding collars, making it particularly suitable for anchors in hard limestone. Not suitable for use on soft rock such as sandstone or for climbing anchors.

New caving anchor, small in size, lightweight and easy to use, making arming even easier. No more carabiners! The cable contact point on the anchorage takes place on a Ø 10 mm.

MINOX / M8 - Hanger with screw M8 in stainless steel. Stainless steel hanger with a stainless steel screw M8. The screw is clamped to avoid the risk of accidental loss.

Stainless Steel AISI 316L Bolt Hanger - "WING / M8" with Stainless Steel M8 Screw. Stainless steel bolt hanger for caving use. is best used in combination with a stainless steel RAINOX M8 (art.130) anchor system.

Replace the standard bolt on the spit plate model Vrillée or Coudée with a wing bolt to be able to mount your spit plates without an equipping key during the cave.

TAP means self-drilling anchor, brand new item. The advantage is that in this case you don't have to use the drill to make the hole, but you can do it all manually using the Raumer Stroker.

Stainless steel “WING” 8mm bolt hanger with a stainless steel Ø8 ring. Stainless steel bolt hanger formed in 40°. Particularly practical in combination with a suitable knot for building caving anchors without additional carabiner

Equipped with a stainless steel M8 bolt, making it compatible with classic self-drilling SPIT-ROC or stainless steel RAINOX M8 screw anchors. This item is made of stainless steel AISI 316L.