Adhesive anchors

 Chemical resin anchor is the term given to anchors that are not fitted in the traditional anchored method e.g. with the expansion of the anchor or the thread cutting into the surface of the hole.
With chemical anchoring, a resin is injected into the hole prior to insertion of the (stainless) steel anchor. With this, the chemical naturally fills in all irregularities and therefore makes the hole airtight and water proof, with 100% adhesion.

Clean the hole of dust and debris. Brushes are available or you can use air, by blowing down a tube.

The anchors must be installed with the correct epoxy resin.
Resin packed in glass capsules for fixing heavy loads in stone / rock.
Glass capsules are solutions proven millions of times over in the various applications to be able to exert heavy loads in concrete without expanding pressure. The components already pre-portioned in the glass capsule make installation easier. The glass capsules are therefore particularly suitable for individual applications or for overhead mounting. The storage in the glass capsule, protected against the effects of light, also ensures a long shelf life without limiting the fixing values. There are glass capsules for the most different applications, both indoors and outdoors, with threaded rods and internal screw anchors.

Sort by
  • Fischer RM 8 glue capsule
    Fischer RM 8 glue capsule

    The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations. Secure anchoring of high loads.

    € 2,89
  • Fischer RM 10 glue capsule
    Fischer RM 10 glue capsule

    The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations. Secure anchoring of high loads.

    € 2,89
  • Fischer RM 12 glue capsule
    Fischer RM 12 glue capsule

    The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations. Secure anchoring of high loads.

    € 2,99
  • Raumer ANTRAX anchor in stainless steel Ø 8x80mm
    Raumer ANTRAX anchor in stainless steel Ø 8x80mm

    The smallest in the resin anchor range and currently the only 8mm model on the market. Shaft with serrated surface. Stainless steel anchor with the best sealing performance in resin.

    € 5,28
  • Raumer RADIUS inox Ø 10x80
    Raumer RADIUS inox Ø 10x80

    Stainless steel anchor with a semi-circular eyelet is perfectly smooth, allowing top-rope lower-offs without damaging the rope sheath.. The shape of the eyelet has been designed to withstand high levels of tensile or shear force.

    € 6,07
  • Raumer SUPERSTAR anchor in stainless steel Ø10x80mm
    Raumer SUPERSTAR anchor in stainless steel Ø10x80mm

    The most widely used resin anchor in the world. The shape of the eye is designed to withstand high levels of tensile or shear force. Pick up the eye two carabiners at the same time or a folded and flattened rope of Ø10 mm.

    € 5,61
  • Available on request

    Raumer MASTERFIX stainless steel anchor Ø12x100
    Raumer MASTERFIX stainless steel anchor Ø12x100

    Strong and secure stainless steel resin anchor for installing towbars and building belays on mountain and climbing routes. The large diameter and the 100 mm length of the shaft make this bolt completely reliable.

    € 10,00 € 9,65
  • AustriAlpin adhesive anchor glue in bolt (75 mm)
    AustriAlpin adhesive anchor glue in bolt (75 mm)

    Glue in bolts (75mm), Made of durable 8mm inox steel wire, big eye. Eye for 2 carabiners.

    € 10,50
  • AustriAlpin adhesive anchor glue in bolt (90 mm)
    AustriAlpin adhesive anchor glue in bolt (90 mm)

    Glue in bolts (90mm), Made of durable 8mm inox steel wire, big eye.

    € 10,99
  • Raumer SUPERSTAR - anchor in stainless steel Ø10x80 with stainless steel double ring Ø10
    Raumer SUPERSTAR - anchor in stainless steel Ø10x80 with stainless steel double ring Ø10

    This excellent stainless steel resin anchor is used to create abseiling or top-rope anchors. The dual rings allow for easy retrieval of the rope from below.

    € 17,84
  • NEW at CanyonZone

    Raumer RADIUS inox Ø 10x100
    Raumer RADIUS inox Ø 10x100

    Stainless steel anchor with a semicircular eye, The shank is serrated. The eye of the “RADIUS” anchor is perfectly smooth, allowing the rope to be lowered at the top without damaging the rope sleeve.

    € 8,32
  • NEW at CanyonZone

    Raumer SUPERSTAR anchor in stainless steel Ø10x100mm
    Raumer SUPERSTAR anchor in stainless steel Ø10x100mm

    Stainless steel resin anchor with shank length of 100 mm. The serrated part is 80 mm long; this provides increased resistance to tensile force when the anchor is placed on soft (limestone) or loose rock.

    € 7,65
  • Raumer Special Resin Anchor Placement Device
    Raumer Special Resin Anchor Placement Device

    This simple device uses an SDS PLUS attachment and can be used with compatible drills to fix Raumer classic resin anchors model Superstar when using pre-dosed resin. Weight: 160 gr.

    € 21,37
  • Raumer Special Resin Anchor Placement Device - RADIUS
    Raumer Special Resin Anchor Placement Device - RADIUS

    This simple device uses an SDS PLUS attachment and can be used with compatible drills to fix RADIUS Raumer classic resin anchors when using pre-dosed resin. Weight: 87 gr.

    € 21,73
  • Raumer Special Resin Anchor Placement Device - MASTERFIX
    Raumer Special Resin Anchor Placement Device - MASTERFIX

    Using a hammer drill, it allows quick and effortless placement but also ensures that the resin mixes completely with the catalyst.

    € 21,73
  • J-Anchor SS316
    J-Anchor SS316

    A stainless steel rod with a diameter of 14 mm bent into a J-anchor.
    The wire grooves ensure perfect adhesion of the adhesive. An ideal option for canyons that see huge (flood) currents. Installed in pairs of two.

    € 9,25 € 8,99
Sort by

Newsletter

Subscribe to our newsletter
Subscribe
© 2013 - 2024 CanyonZone | sitemap | rss | ecommerce software - powered by MyOnlineStore