Single pulley without brake

Compact and very light synthetic pulley with 15kN breaking load and hinged side walls. Perfect for building a hoisting system in an emergency or to descend more gradually from the Guided Rappel. Rope up to 11 mm.

A very light auxiliary pulley with movable sides. Can be installed quickly and easily due to the mobile flanks and is therefore excellent for use in emergency hoist rescue kits in the canyon or cave. Ropes: 7 to 11 mm.

Compact and light pulley with mobile flanks and high efficiency.
Is a compact and light pulley with flexible flanks and high efficiency. Block sheave is mounted on a watertight ball bearing. Rope: 7 to 11 mm.

Is een lichte, compacte en sterke katrol voor takelsystemen en last-omleidingen met een ideale verhouding tussen gewicht en prestaties. te gebruiken om touw te om te leiden en zo slijtage door vuil en wrijving te voorkomen.

Is an aluminum Prusik pulley with mobile flanks and high efficiency for rescue: rescues, hoisting of heavy loads and intensive use. Sheave is mounted on sealed ball bearings. For three carabiners.

Is a light and flat aluminum prusik pulley with mobile sides; despite its compact size strong enough to work with heavy loads. Disc type sealed ball bearings. Rope 7 - 11mm.

Is a high-efficiency aluminum pulley without backstop that can be opened and/or closed while anchored. Install a hoist system safely, quickly and easily. A closed ball bearing. Rope 7 - 13mm.

Simple, strong, compact and light fixed side pulley for hoist systems and load diversions with an ideal weight to performance ratio. Guide the rope to prevent wear. Ropes 7 to 13 mm.

Is lightweight rescue pulley. High strength aluminum sides keep it light while a stainless steel shaft resists corrosion. Pulley has prusik-minding capability for use in 3in1 mechanical advantage systems.

The machined pulley is machined from a block of 7075 aluminum so that material can be omitted where it is not needed. These pulleys are more compact, stronger and lighter in weight than the usual stamped pulleys. Rope 11mm.

Replaces the traditional pulley, carabiner and anti-torsion link and is lighter, cheaper and saves valuable height. You can also take the rope in and out of the pulley while the pulley is fixed in the system. Rope 13mm.

Is a pulley with fixed side plates. For hoist works and deviations. Made of anodized light alloy; sheaves mounted on ball bearings; Ropes up to 13 mm.

Is a pulley with movable side plates that make it possible to click in a carabiner. Made of anodized light alloy;
Pulleys mounted on ball bearings. Ropes up to 13 mm. For hoist works and deviations.

Pulley with movable side plates that allow a carabiner to be clicked in. Made of anodized light alloy; sheaves mounted on ball bearings; Ropes up to 13mm. For hoist works and deviations.

Compact and lightweight pulley with fixed side plates. Stainless steel shaft and ring. The disc is mounted on a bronze collar to promote good efficiency. Unique identification number. Rope max diameter 12mm.

Pulley with fixed side plates and ball bearings for optimum efficiency. Allows to set up a pulley system by adding a component such as a rope clamp. Individual identification number. Cable max 13mm.