Raumer HANG FIX inox M10L (Ø10x86mm)SKU: 157
Raumer HANG FIX inox M10L (Ø10x86mm)
HANG FIX Stainless Steel Bolt M10L – Ø10x86 expansion bolt
- Stainless steel AISI 316L bolt, designed for climbing, mountaineering and rescue anchors.
- Highly resistant and reliable, it features two expanding collars and is suitable for use on numerous rock types.
- Widely used by climbers on the majority of sport crags throughout the world.
- Total length: diam.M10x86 mm. Double expansion bolt.
- The expanding collar is a new design and has greatly improved on the previous version.
- The design phase focused on creating a technology which ensures expansion on an increased number of surfaces.
- Our tests show that this objective has been achieved.
- Attention: On particularly soft rocks (such as sandstone) all expansion bolts - including our own - are not recommended due to the unreliable nature of the supporting material.
- In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.
- The majority of our anchors are made with stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304.
- To highlight this difference each article is stamped with the relevant symbols.
- However, bolts have not been branded as once in place, the symbols would be invisible, instead, a small circular collar has been added (see photo above) to mark the difference between the two metals.
- This allows verification of the type of bolt used at any time.
- There is also a “Marina” version of this anchor which is highly resistant to saline corrosion.
- To mark the difference between stainless steel AISI 316L and the marina version of the same material, all marine-suitable anchors have been marked with a fish symbol and the initials “INOX".
- Note: As mentioned above, this branding is not used on bolts.
- In order to differentiate the marine version, as well as the afore-mentioned collar there is a small engraved dimple which allows for accurate identification once the bolt is in place (See photo above).
- We recommend reading the attached PDF document for a detailed explanation of the problems presented by marine corrosion.
- MARINA version: Art.157M - available on demand
- Extraction R = 26 Kn
- Radial R = 31 Kn
- Weight = 60 g