Available on request
MULTI-MONTI Ø7,5x60 GALVANIZED screwanchor
SKU: 289
MULTI-MONTI Ø7,5x60 GALVANIZED screwanchor
This reusable screw is used to place anchors for the first exploration of a pothole.
The battery life of the hand drill is extended as the holes must only be 6 mm wide and 60 mm deep. See drill bit.
New mounts with new threaded extension, new tip with larger and more sharp seam, new smaller hex head with washer and reinforced underside; To screw, use a 10 mm spanner / wrench.
This anchor is exceptionally strong and guarantees an acceptable level of safety. However the surface must be solid.
This screw is excellent value for money and when needed can be reused multiple times.
TECHNICAL SPECIFICATIONS
- MULTI-MONTI anchors are produced and patented by the German company HECO SCHRAUBEN KG & Co.
- It is an innovative self-threading screw system and is highly resistant and practical.
- The first part of the Multi-Monti thread is characterised by thread serration / teeth, that, when screwed, the anchor cuts into the material and creates the space for the rest of the screw.
- Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the rock/concrete, reducing the risk of damage or breakage.
- The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused.
- This procedure should not be employed more than three times on rock and only once on granite.
- Multi-Monti anchors are very resistant and reliable.
CERTIFICATIONS
- European Technical Approval ETA 15/0784
- F120 fire-resistance rating for use on various materials such as concrete, limestone and solid bricks
Customers also bought
Spanner / wrench 10-13With this stitch key you both M6 (# 10) and M8 (# 13) to tighten nuts in one. Especially a must at the exploration with Multi Monti screws using to take this standard into your caving set and spitkit.
€ 7,50
