Pulleys

Compact and very light synthetic pulley with 15kN breaking load and hinged side walls. Perfect for building a hoisting system in an emergency or to descend more gradually from the Guided Rappel. Rope up to 11 mm.

Is lightweight rescue pulley. High strength aluminum sides keep it light while a stainless steel shaft resists corrosion. Pulley has prusik-minding capability for use in 3in1 mechanical advantage systems.

Is a high-efficiency aluminum pulley without backstop that can be opened and/or closed while anchored. Install a hoist system safely, quickly and easily. A closed ball bearing. Rope 7 - 13mm.

Is a pulley with fixed side plates. For hoist works and deviations. Made of anodized light alloy; sheaves mounted on ball bearings; Ropes up to 13 mm.

Is a pulley with movable side plates that make it possible to click in a carabiner. Made of anodized light alloy;
Pulleys mounted on ball bearings. Ropes up to 13 mm. For hoist works and deviations.

Pulley with movable side plates that allow a carabiner to be clicked in. Made of anodized light alloy; sheaves mounted on ball bearings; Ropes up to 13mm. For hoist works and deviations.

Ultra-light pulley with backstop. For lifting loads, clearing crevices or as an emergency cable clamp. Ball bearing aluminum roller for high effective burr. The backstop can be locked in the open position.

Ultra-light pulley with rope clamp function with switchable backstop for crevasse rescues, hoisting operations and self-rescue techniques. Can be used as an emergency ascender. Sealed Ball Bearings. Rope: 8 - 11mm.

Is a high-efficiency rope clamp suitable for ropes with a diameter of 8 to 13 mm and can be used as a pulley, rope clamp and pulley rope clamp. Suitable for lifting heavy loads.

Is a double prusik pulley with an efficiency. The flanks have been modified so that you can use a prusik knot if you use a backstop. locking disc is mounted on a watertight ball bearing. Rope 7- 11mm.

Is a double pulley with high efficiency without backstop.
In combination with the Petzl Jag Traxion, a 4:1 hoist system can be made quite easily. Block discs are mounted on a watertight ball bearing. Rope 8-11mm.

Is an aluminum Prusik pulley with mobile flanks and high efficiency for rescue: rescues, hoisting of heavy loads and intensive use. Sheave is mounted on sealed ball bearings. For three carabiners.