Ascending

Rappel backup rope clamp Used under the rappel device, the SHUNT acts as a rappel backup and absorbs friction hitches like the Prusik. Works on one and half ropes. Single rope 10-11 mm or double ropes 8-11 mm.

Short length of 8 mm rope (90 cm) sewn with eyelets for making self-closing (prusik) knots. highly heat-resistant aramid fibers in the Volcano, it is protected against melting and the service life is significantly extended.

A compact ventral ascender for ascending ropes. An ergonomic protruding lever facilitates operation of the cams. All-metal construction of the operating mechanism to increase durability.

The shape of the ascending motion allows it to be held with two hands when ascending rope: one on the side below the trigger and one above. The handle is reinforced for ergonomics and comfort.

Lightweight, compact chest rope clamp for climbing a rope. Channeled lugs for optimal grip on frozen or muddy ropes. Clamping mechanism with safety lock. For kernmantle ropes with a diameter of 8.0 - 13.0 mm.

This revolutionary rope clamp has a more intuitive handle and is smaller and lighter than other rope clamps. A smaller handle is included for smaller hands. This rope clamp works on rope diameters from 8 to 12.7 mm.

Compact and lightweight chest runner for safe and smooth takeoff, rescue and special rope techniques. Simple and fast manipulation
for dynamic ropes with little stretch. Rope diameters Ø 8 - 13 mm. Provided with a unique number.

Left hand riser for safe and smooth ascent. Extra-wide handle and attachment point for two carabiners fit anywhere. Stainless steel toothed cam for higher corrosion resistance. For ropes from 8 - 13 mm.

Right hand riser for safe and smooth ascent. Extra-wide handle and attachment point for two carabiners fit anywhere. Stainless steel toothed cam for higher corrosion resistance. For ropes from 8 - 13 mm.

Has alloy comb for reduced weight. Easy to lay the ropes with a simple action by opening the sprung side plates. Flat cam profile is easy to release, even under light loads.

Two feet / double foot pedal adjustable length (make a overhand loop to customized on your right length). Made of Dyneema cord (120cm)

Caving chest harness in the shape of a figure eight, one size. Supplied with an "EG" G07 galvanized link. 33mm flat webbing with flexible cross at the back. Adjustable with steel ladder lock buckle. Individual number.

Accessory webbing for chest ascender fixation. Fixes the chest ascender in the right position (see Singing Rock Cam Clean).
Fixed by accessory sling or a mailon carabiner to front / back ​attachement point on the harness.