Rappel Backup
The rappel rope backup is a Back up for climbing, self-securing during rappelling, as a ascender or in combination with a Prusik pulley in lifting systems.
Beal Volcano 8mm x 70cmBEAL VOLCANO Short length of 8 mm rope sewn with eyes for the construction of self-locking (prusik) knots. This rope is composed of 50% aramid construction mixed with polyester filaments. Prusiks made of conventional ropes have a…
€ 29,42 € 26,50- Beal Volcano 8mm x 90cm
BEAL VOLCANO Short length of 8 mm rope sewn with eyes for the construction of self-locking (prusik) knots. This rope is composed of 50% aramid construction mixed with polyester filaments. Prusiks made of conventional ropes have a…
€ 30,66 € 27,50 
BlueWater Rope 7mm VT Prusik KhakiBLUEWATER ROPE 7MM VT PRUSIK KHAKI Designed by Rich Carlson and manufactured by BlueWater Ropes, the VT Prusik features a super tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this…
€ 32,50- BlueWater Ropes 8mm VT Prusik Khaki
BLUEWATER ROPE 8MM VT PRUSIK KHAKI BlueWater Ropes VT Prusik. This specialty design features super tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this kernmantle design keeps the VT from…
€ 34,50 
Petzl ShuntPETZL SHUNT Rappel back-up ascender / Backup deviceUsed below the rappel device, the SHUNT works as a rappel back-up and replaces friction hitches like the Prusik. Works on single and half ropes. A mechanical replacement for…
€ 65,00 € 58,95NEW at CanyonZone
Sterling Rope HollowBlock2STERLING ROPE HOLLOWBLOCK2 Sterlings bestselling friction hitch and autoblock has been redesigned with a stronger aramid fiber.
The 6.8 mm HollowBlock2 is made of 100% Technora® fiber for increased abrasion resistance and…€ 27,99
