Descent Canyoneering Rope Bag ShortSKU: SHORT RBAG
Descent Canyoneering Rope Bag Short
The "Short Descent" canyoneering specific rope bag was designed to easily manage your ropes, regardless of canyon conditions. Knowing first hand how quickly a canyon can wear out any and all gear, our bags are manufactured using materials that are capable of withstanding that excessive wear & tear and pure physical abuse common in canyoneering. Long lasting materials, embedded floatation and superb drainage capabilities combine to create a canyoneering specific rope bag that performs excellently under any conditions.
- Available colour: Blue
- Weight: 12.5oz (355gr)
- Dimensions: 8" x 12" (20,3cm x 30,5cm)
- Handles: Double Internal
- Security: Double Rope Tie-In Point
- Flotation: Embedded Throughout Design
- Capacity: Approximately 120' @ 9.2mm & 150' @ 8mm (36,5m @ 9.2mm & 45,5m @ 8mm)
- Carry: Molded Rubber Handle/Webbing Grab Strap Along Base
- Drainage: Aggressive Coated Open Weave Mesh with Brass Grommets
- Manufacturing: Designed and Manufactured in the U.S.A.
The "Short Descent" rope bags smaller design allows it to fit easily with the rest of your gear during the approach and is managed easily while in canyon. Weighing in at just 12.5oz the "Short Descent" helps to reduce unnecessary weight, while still delivering the performance expected of a full featured canyoneering rope bag.
With the most common canyoneering ropes ranging in size from 8mm - 9.2mm, a design was developed that would accommodate that range. 120' @ 9.2mm minimum was chosen to allow any canyoneer, regardless of rope preference, to utilize the bag.
Inside the bag you will find tie-in points for each rope end, along with two handles sized to fit comfortably in your hands. The handles are meant to aid in stuffing the rope, and throwing the bag, while staying internal to avoid unnecessary clutter that can get caught up while working down canyon.
Floatation embedded throughout the design keeps the rope on the surface so you can focus on grabbing your gear instead of working out a dive routine to the depths of a freezing pool.
Although the floatation has worked excellently throughout testing, it is recommended that you test your floatation independently before throwing it blindly into a deep pot hole.
The bulk of drainage is accomplished extremely fast through the 360° mesh layer while the grommets polish off any small traces of water that happen to get left in the base. You will never be slowed down waiting for that extra water to drain!